By magnetic I mean the encoder has no rotating part, it just senses the rotation of a magnet.
This one: https://www.rls.si/en/rmc22-commutat...mental-encoder
Thread: Motor encoder alignment
Results 1 to 17 of 17
Hybrid View
-
11-06-2018, 03:48 PM #1
Registered
- Join Date
- Mar 2014
- Posts
- 1132
Re: Motor encoder alignment
-
11-06-2018, 03:52 PM #2
Community Moderator
- Join Date
- Dec 2003
- Posts
- 24220
Re: Motor encoder alignment
I see, I believe I tried a similar version made by CUI but it was in the early stages of development and I had varying degrees of success with it.
Originally Posted by Azalin
Those look similar, if so they are self calibrating, i.e. requires no scope to align.
Al.CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Reply With Quote
Similar Threads
-
HOW TO CHANGE ACTIVE ENCODER FROM LINEAR SCALE TO MOTOR ENCODER IN SIEMENS 840D.
By sandeepmb123 in forum SIEMENS -> Sinumerik 802D/808D/810D/828D/840DReplies: 0Last Post: 01-02-2014, 08:05 PM -
Encoder alignment
By John_B in forum Cincinnati CNCReplies: 3Last Post: 10-04-2011, 12:44 AM -
Commutation Signals alignment to the motor shaft
By wahidbashir in forum Bridgeport / Hardinge MillsReplies: 0Last Post: 12-20-2010, 06:28 PM -
Problems with motor stalling due to motor/lead screw alignment
By Bimmerkc1 in forum DIY CNC Router Table MachinesReplies: 3Last Post: 01-25-2010, 01:12 AM -
How to tell if my motor is Pulse encoder or quadrature encoder?
By Darc in forum Servo Motors / DrivesReplies: 0Last Post: 07-22-2005, 09:51 AM
Tags for this Thread
Posting Permissions
