i am having bridgeport series 1 mill. so i ordered geckos 202 drives & pmdx 122 board. can i use MAXNC software with drives, if not wat would the better option. came to know that mach 3 has some problems. please advice, thanks
i am having bridgeport series 1 mill. so i ordered geckos 202 drives & pmdx 122 board. can i use MAXNC software with drives, if not wat would the better option. came to know that mach 3 has some problems. please advice, thanks
What problems?Originally Posted by ajitsingh
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
latter i came to know it was drivers problem. it was not a mach 3 problem. please suggest which version of mach 3 is advisable for mill with geckos 202. thanks