I've seen a lot of people using 1/4" CRS on top of 8020 as a bearing way. This is what I am planning to do on my new build. In all the builds I have seen, the CRS is attached with 5/16 carriage bolts mounted with the head in the slot and the steel bolted on with a hex nut. My question is could you drill and countersink the CRS and attach with flat head screw that would be screwed into T-nuts in the 8020 channel. Would this affect the strength or accuracy of the way. I think this would make for a cleaner looking build
Thanks for any info
Alton