Originally Posted by
alex gitzel
That is your waylube pump you can use mobil vactra2,shell tonna 68v,or castrol magna bd68.that is what is listed in the manual.some machines have another pump above the waylube pump for the spindle if it has an air/oil type spindle that is why i wanted the pic.the message you got about spindle lube is a generic message.make sure the waylube pump goes to 250-400 lbs.on the gauge when it cycles and holds it for 10 seconds any less pressure and it will not lube properly,if this happens post it.for the dowfrost leaks check for discoloration or rust at the end of the screws by the motors,around the spindle and the inline sensor under the rear cabinet,also check for leaks around the pump,i use food coloring(baking isle at the local grocery store) in the dowfrost to help find small leaks get a color the will show good in your coolant.