587,560 active members*
3,387 visitors online*
Register for free
Login

Thread: Bridgeport V2E3 CNC Mill Boss 8

Results 1 to 4 of 4
  1. 10-17-2007, 08:31 PM #1
    kebell03
    kebell03 is offline Registered
    Join Date
    Oct 2007
    Posts
    3

    Bridgeport V2E3 CNC Mill Boss 8

    I am troubleshooting a (1985 Bridgeport V2E3 CNC Mill Boss 8 Texttron) and I have no manuals for it. Fuse 12 in the drive power supply keeps blowing. I am trying to figure out what the fuse 12 is connected in line with and hopefully to my problem. If anyone could offer some insite into this it would be a great help.
    Reply With Quote Reply With Quote
  2. 10-18-2007, 01:49 AM #2
    machintek
    machintek is offline Moderator
    Join Date
    Nov 2004
    Posts
    3028
    I believe wire 13 feeds fuse 12 which then goes to the drive power supply.

    George
    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
    Reply With Quote Reply With Quote
  3. 10-18-2007, 06:26 PM #3
    wcarrothers1
    wcarrothers1 is offline Registered
    Join Date
    Oct 2006
    Posts
    735
    I know this will probably not help (since I'm a boss 10) but one of my fuses (memory is fogge though) for I think the X axis drive blew when I first started playing and it was due to the jib in the table comming loose and jaming the table. Replaced fuse, freed/fixed table/jib and didn't have the problem again.

    b.
    Reply With Quote Reply With Quote
  4. 10-29-2007, 06:36 AM #4
    kebell03
    kebell03 is offline Registered
    Join Date
    Oct 2007
    Posts
    3
    do you think the maintinace manual for the V2E3 will help me find out what the fuse 12 goes to. I just ordered one online.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Trouble with a series 1 boss 8 v2e3
    By fireman323 in forum Bridgeport / Hardinge Mills
    Replies: 2
    Last Post: 08-28-2007, 12:53 AM
  2. YA Bridgeport BOSS capability
    By zcases in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 1
    Last Post: 10-18-2006, 04:48 PM
  3. Bridgeport CNC Mill, Model R2E4, Boss 9 Control
    By Tbucit in forum Bridgeport / Hardinge Mills
    Replies: 5
    Last Post: 03-18-2006, 04:39 AM
  4. Bridgeport R2E3 with Boss 8
    By John Bennett in forum Bridgeport / Hardinge Mills
    Replies: 0
    Last Post: 09-17-2005, 01:35 AM
  5. bridgeport mill series1 boss 4?
    By jerid1 in forum Bridgeport / Hardinge Mills
    Replies: 5
    Last Post: 07-08-2005, 12:10 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules