Hello.
I am having video artifacts after upgrading to Solidworks 2009 from SP0 to SP4.1. Happens only with Solidcam active. Artifacts are present while selecting geometry for pocket or drill operations. Its like bad model refresh because when selecting and moving the cursor around it leaves trails.
In the attachment you can see coordinate system all smudged and some other artifacts.
Anyone has a solution?
Results 1 to 3 of 3
-
11-15-2009, 09:09 PM #1
Registered
- Join Date
- Feb 2004
- Posts
- 466
Solidcam 2k9 Solidworks2k6 SP4.1 video artifacts
-
11-16-2009, 08:56 AM #2
Registered
- Join Date
- Oct 2007
- Posts
- 499
I have had this problem but quite some time ago. It was cured by installing older graphics drivers for my Quadro FX4600 graphics card.
-
11-16-2009, 05:09 PM #3
Registered
- Join Date
- Feb 2004
- Posts
- 466
I see, right now I am using the 191.07 nvidia drivers for my 8800GTS 320mb EVGA card.
Reply With QuoteSimilar Threads
-
.STL into SolidCAM?
By Vrogy in forum SolidCAM for SolidWorks and SolidCAM for InventorReplies: 4Last Post: 11-08-2009, 09:30 AM -
Considering SolidCAM
By martin_05 in forum SolidCAM for SolidWorks and SolidCAM for InventorReplies: 10Last Post: 11-05-2009, 09:53 AM -
PBC Linear Creates Measuring Stand for Million Dollar Artifacts
By Pacific Bearing in forum News AnnouncementsReplies: 0Last Post: 03-27-2009, 02:53 PM -
solidcam
By Phyxsius in forum SolidCAM for SolidWorks and SolidCAM for InventorReplies: 4Last Post: 10-17-2007, 06:59 PM
Posting Permissions
