I would greatly appreciate help getting mastercam 9 Wire to to cut die pockets with a 1 degree taper below a .125 land. I don't want to program the z axis. The machines are a Charmille and Fanuc.
I would greatly appreciate help getting mastercam 9 Wire to to cut die pockets with a 1 degree taper below a .125 land. I don't want to program the z axis. The machines are a Charmille and Fanuc.
K mays,
This is a quick video I did, I'm ot quite sure this is what you are after. If not let me
know. http://www.cad2cam.net/wire v9/wire v9.html
steve
[email protected]
www.cad2cam.net
www.cad2cam.net
Programmer/ Certified Cam Instructor
www.cad2cam.net
Programmer/ Certified Cam Instructor
Kmays did this help?
steve
www.cad2cam.net
www.cad2cam.net
Programmer/ Certified Cam Instructor