i need this done on .125 thick aluminum sheet. dimensions are 15" long x 5"wide at widest point 3.5" were writing goes must be centered and look like picture a qoute on ten pieces just the engraving. future work will come payment will be in advance.
Thread: rfq on .125 aluminum engraving
Results 1 to 6 of 6
-
07-10-2006, 06:36 PM #1
Registered
- Join Date
- Oct 2004
- Posts
- 48
rfq on .125 aluminum engraving
-
07-10-2006, 08:30 PM #2
Registered
- Join Date
- Apr 2006
- Posts
- 100
email me at [email protected] for a quote.
[email protected]
www.hessemachine.com
-
07-17-2006, 09:30 PM #3
Registered
- Join Date
- Apr 2006
- Posts
- 100
If you e-mail me I can quote this for you. I would e-mail you a quote but your e-mail is hidden
[email protected][email protected]
www.hessemachine.com
-
07-21-2006, 02:14 AM #4
Registered
- Join Date
- May 2004
- Posts
- 11
do you want the quote to include material? I would be happy to quote this for you; please email [email protected].
Thanks,
Jonathan Blanchard
Actaeon Custom Woodworks, LLC
Winter Garden, FL
-
07-24-2006, 02:28 PM #5
Registered
- Join Date
- Apr 2005
- Posts
- 345
I would be happy to provide a quote as well, please email me at [email protected].
Thanks
Scott
-
01-23-2007, 01:34 AM #6
Registered
- Join Date
- Jan 2007
- Posts
- 18
I charge you $50.00 per plate.
Originally Posted by cncsdr
M&D Precision Co
Martin Deluna
9807 Autumn Arch
Converse, TX. 78109
Cell: (210) 386-6334
Fax: (210) 568-6087
E-mail: [email protected]
Reply With Quote
Posting Permissions
