Hi everyone,
I want to run my machine in 'Tape mode, DNC, Dripp feed' (I don't know what is the correct name for it)
I have a Takisawa MAC-V1E with a Fanuc OM model B (controller. I have already upgraded the memory to 128kB (320m), is not posible to see the ladder in this controller, Ladder is in 2 Eproms (UVproms) HN27C256AG-15 PGM 12.5v (see photo)
We have already tried to change the parameters 0002 and 0552. It doesn't seem to work. I don't know if it have a special technique to call a DNC programme form this controller
(i am open to new suggestion about how to make it work without touching the ladder)
DNC (drip feed or G127.5) option dos not seem to be enable in the ladder. So if i understand well, i need to reed it, erase it with UV and after i can right the modified ladder on it. I have An Eprom Programmer (USB), and UV light for erase it, a dos emulator, and the old version of Fapt Ladder.
I need help to make it work, I don't find a identical situation in an other Thread, I have a PMC-L with a 27C256 Eprom.
Thanks a lots for your reply ( sorry for my English i talk french.