Hey Guys;
I've seen similar threads on the 5V ps questions several times over the past year or so. But, when I bench tested my servo system with g320's, I could not get the motors to respond to mach3 when using an external 5V power supply. I had to tap the 5volts off of the control computer with an extra line. My system is soon to be finished and I'll have to rebuild the control system onto the machine. What was I missing to cause my system not to respond when using an external supply??? Unfortunately, I've since given advice here on the forum to use the computer 5V to power the gecko's when someone had a similar problem to mine. Was I giving bad advice to these folks? Hope not. Someone enlighten me!
billyjack
billyjack
Helicopter def. = Bunch of spare parts flying in close formation! USAF 1974 ;>)