588,392 active members*
5,603 visitors online*
Register for free
Login

Thread: Mach3 console?

Results 1 to 3 of 3
  1. 10-18-2006, 03:41 PM #1
    RLC
    RLC is offline Registered
    Join Date
    Aug 2005
    Posts
    90

    Mach3 console?

    Hello All,
    I’m currently building new controls for an RF31 mill/drill. I will be using mach3 for software. I have seen a couple of control panels out there that have hardwired buttons, joysticks and MPG’s in conjunction with the keyboard/mouse. I was wanting to a rotary switch to select the axis and another to select jog mode, then use a joystick for the actual jogging. And was wondering if this is possible or if anyone can point me to a thread or website that’s has some information on what I’m wanting to accomplish.
    Robert
    Reply With Quote Reply With Quote
  2. 10-18-2006, 04:35 PM #2
    ger21
    ger21 is offline Community Moderator
    Join Date
    Mar 2003
    Posts
    35538
    http://www.machsupport.com/MachCusto...n_case_studies
    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
    Reply With Quote Reply With Quote
  3. 10-18-2006, 07:50 PM #3
    RLC
    RLC is offline Registered
    Join Date
    Aug 2005
    Posts
    90
    Gerry,
    Thanks for the quick reply, and pointing me in the right direction....that is what I was looking to do.
    Robert
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules