hello, got our first mill, im a lathe guy, and i am trying to learn some basic programming. I have a part that is out of .3125" wide x 1.0" tall stock and i have to mill the end of it and put .05" x 45 degree chamfers on each side on the entire 1 inch depth. i am hanging out of the right side of the vise. i am going to call the edge x 0. also. i am using a 3/8" endmill. and if it is easy to explain can you walk me thru figuring out the start and endpoints.
------\ ^
. .312 |
------/ v
thanks
phil