[jeff3]

Hello, I have an older (early 90's) Fadal that has a bad crt assembly. Can I swap it out with a crt assembly from a CNC 88HS? Did anything change on the crt assembly from the 88 to the 88HS? If anyone would happen to know, I certainly would appreciate a comment. Thank You

[denmar]

maybe the chassis are difernt; both have a coaxel video cable(rf); beside that they are the same.

[ASIGuy]

Hello, I have an older (early 90's) Fadal that has a bad crt assembly. Can I swap it out with a crt assembly from a CNC 88HS? Did anything change on the crt assembly from the 88 to the 88HS? If anyone would happen to know, I certainly would appreciate a comment. Thank You

Yes, they should be perfectly interchangable. The part number is an ELE-0189A and we stock plenty of new ones when you are ready to replace the one you take from the older machine.

Good luck!

Brian D.
FadalCNC

[jeff3]

Thanks very much for the help!

[ASIGuy]

Any time.

Brian D.
FadalCNC