[Mobius]

Foot switch was Flip/Flop type circuit.

opens or closes

no. For safety reasons there was a Toggle Switch some where on the Operator's Panel for clamping direction OD or ID to disable Cycle Start.

Hope that helps some,
DJ

Thanks DJ

So you're saying the valve is suppose to close and hold pressure once you let off the foot pedal?

[machinehop5]

So you're saying the valve is suppose to close and hold pressure once you let off the foot pedal?

No..saying it should Flip the Valve every time the foot switch is pushed down.

hold pressure once you let off the foot pedal?

There is always holding pressure when the machine is running.

[Mobius]

No..saying it should Flip the Valve every time the foot switch is pushed down.

There is always holding pressure when the machine is running.

Thank you!