I have been having an issue on my umbrella style tool changer on my Super Mini Mill where there is a slight delay at the end of the tool change. I just changed my air solenoid valve ( labeled "A" on my photo )
That seems to help, but on about every 5th took change there is still a delay.
I took the cover off the part labled "C" and sprayed some mass air sensor cleaner inside that, and now I'm getting a honking noise at the end of the tool change. ( The best way I could describing his like a goose call )
I'm running an air dryer on my air lines.
Any suggestions ?
One other question.... The Part labeled "B" appears to be an adjustable regulator, I haven't touched that yet, but just wondering if thats something I should look at adjusting?
I have posted a video on Youtube showing the slight delay, and the honking noise.
https://youtube.com/shorts/OwzfPm1rCvA
Thanks,
Kent
![Click image for larger version.
Name: Tool Changer.jpg
Views: 1
Size: 110.0 KB
ID: 481188](https://en.industryarena.com/forum/attachment.php?attachmentid=481188&d=1655755318&thumb=1)