Flowline tool path ...
I have some B axis moves that are going - 120 to + 220
I would like to keep it - 155 to + 205
not much documentation on these limits
Thanks
Flowline tool path ...
I have some B axis moves that are going - 120 to + 220
I would like to keep it - 155 to + 205
not much documentation on these limits
Thanks
Kojack, have you revied the axis limits shown in this picture?
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Cadcam
Software and hardware sales, contract Programming and Consultant , Cad-Cam Instructor .
Yes thats the tab Im talking about ..
I have tried everything
You would think The zbox would control B axis
But it controls the A when I type in min 10 Max 25 it limits the A axis
The B axis I could get some changes but not what I wanted with the X and Y
check boxes Not sure how the numbers work When you go past 180 or its a -
number.. Just really confused ...
thanks