[lee_1999]

I'm looking for a homeshop machinist or small machine shop to make parts on a regular basis for me. Mostly simple brass and aluminum parts. Lathe and mill. Quantities 25-50 pc lots. Located in Colorado and would like to find someone in the area, but will consider out of state as well.
April 8, 2004
Thanks-

[wms]

Lee_1999,

I sent you a Private Message with some info.

Ward

[Dave671]

That isn't what the customer wanted. (chair)

[cnctoolman]

P.M. sent

[Brant Emery]

If you have not filled this need, I would be interested in giving you a quote. I have 2 CNC mills, 1 CNC lathe, and 1 each manual mill and lathe in my shop.

E-mail me or you can call 630-968-6001 or 630-886-8814 cell.

Brant Emery
E-WAX
[email protected]

[cncmike92]

Please feel free to email me or private message me with what you need. You can email me at [email protected] and I will be more than happy to quote the work for you. BTW, Im located in Ohio

[pettyp]

Would like to Quote
Have a lathe and mill both manuals and a bridgeport xv2216 Highspeed maching center in the garage. I program with featurecam V10
[email protected] or 1-802-893-4032
Thanks

[pmurray]

lee_1999,

Give Rene Teo a call in Longmont at T.S. Engineering, he might be interested.

Has Tuning & Verticle Haas Machines and uses FeatureCam for CAD. Sharp guy; does good work.

Ph#: 720-652-9140

plm

[Rob D]

Give us a call. We are in Illinois but, what you are looking for is what we do.
Rob @ GTD
708 849-0570

[Ken_Shea]

It appears that lee_199 has died, or so it seems, since he has only had one post and ignored every post in response to his request. I did not reply but this seems to be not all that uncommon.


If he has died then he has good reason, if not, he is just another waste your time RFQ poster.

Ken