Will this controller work with mach2 software?
Will this controller work with mach2 software?
Yep, Mach2 will work with any driver board that takes step and direction input via the parallel port.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Yes, and there is a file uploaded to our support group hosted by Yahoo named "hobbycnc" that helps with the setup. A link is on our homepageOriginally Posted by BAM
Dave Rigotti
hobbycnc.com
Originally Posted by hobbycnc
hi dave,
I couldn't find the file (maybe i am dense) what is it named?
thanks
Michael T.
"If you don't stand for something, chances are, you'll fall for anything!"
"Mach2 XML files for 4AUPC" In the files section on our Yahoo hosted support group.Originally Posted by miljnor
Dave Rigotti
HobbyCNC.com
thats what i thought. I tried that one and it didn't work. but one of the guys that works for me told me that the fils has to be an xml file and the explorer saves it as an html file...
so I got it but failed to save it in the right format...
thanks for the quick reply... and I will try it when i get home tonight.
thanks
Michael T.
"If you don't stand for something, chances are, you'll fall for anything!"