[Drools]

I'm thinking about replacing my bent lead screws. I'm not going to go back to the same place where I bought the original ones. Does anyone have a source for quality lead screws?

I'm using ACME 1/2-10 single start, I'm happy with the speed but the vibration the bend screws cause is a pain.

Thanks

[rschieck]

I picked up a couple last Friday from :

http://snbinc.ca/site/?page_id=334

1/2" 10tpi single start.....

I rolled them a cross my freezer and as far as I could tell they were dead straight...

I went to Barrie Ontario to pick them up...

hth

Rob

[Drools]

Thanks very much Rob, I'm in Ontario (northern). It is a 9 hour drive for me to get to Barrie but I hope they will ship to me as the price looks excellent.

[rschieck]

Drop him an email and see where his shop is. It might not help a lot but it is somewhere north of Gravenhurst.....

He will ship it and that I suspect is where your screws are getting bent...

keep smiling

Rob

[PrecisionSpindl]

We can offer lead screws.

Send a note so we can forward a list of stock screws of various diameters, pitch and length.

Precision Spindle & Accessories Inc.

www.precisionspindleinc.com tel. 519 671 3911
[email protected] fax. 519 652 5994