Hi all, I am a new user EMC2 and am noticing my lack of knowledge. The EMC2 AXIS example should be 164mm in size along x axis. Mine varies from 20 to 40 mm depending on microstep settings of the cheap chinese board I use and the stepconf wizard in EMC2.

I guess I need to know what to put in EMC2 Stepconf for the four possibilities on my driver board. The driver board has the four choices 1 1/2 1/8 and 1/16 microsteps. At the moment with 40mm output the EMC is set to 2 microsteps and the driver board 1/8

Confused please help