I can't get 7 to read my 2007 tool library. Looks like I will have enter all the tools in again in 7. Any tips on this?
I can't get 7 to read my 2007 tool library. Looks like I will have enter all the tools in again in 7. Any tips on this?
RAD. Yes those are my initials. Idea, design, build, use. It never ends.
PCNC1100 Series II, w/S3 upgrade, PDB, ATC & 4th's, PCNC1100 Series II, 4th
I noticed the same thing when I first tried the trial version. I spent almost a full day playing with various ways of importing or cutting & pasting my previous tool library without success. I have pretty much accepted that I will have to start from scratch but haven't found the time yet. The new library file does contain additional information.
Yes, I resorted to entering in all the tools in manually. Luckily I had them on a list I had printed out for reference.
RAD. Yes those are my initials. Idea, design, build, use. It never ends.
PCNC1100 Series II, w/S3 upgrade, PDB, ATC & 4th's, PCNC1100 Series II, 4th
SprutCAM 2007 Tool libraries should be compatible with SprutCAM 7. If possible please e-mail me ([email protected]) a sample of 2007 tool library that wouldn't import to SprutCAM 7 correctly.