Folks, I am looking for some conversion software for converting Mac generated DXF files to PC usable DXF files. Any help appreciated.
Thanks, Tom
Folks, I am looking for some conversion software for converting Mac generated DXF files to PC usable DXF files. Any help appreciated.
Thanks, Tom
http://tcurran.com/
They're just text files, so they should be the same.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
This would happen in a "perfect world"
Actually there is a difference between Mac, Dos/Windows and Unix/Linux text files: the newline character.
It is everything explained on Wikipedia:
http://en.wikipedia.org/wiki/Newline#Common_problems
along with workarounds.
I found a work-around. I open the Mac.dxf file into "WordPad" on my PC, save it as a text file, and now the PC based programs can open it.
Wordpad adds line feed and carriage return.
Tom
http://tcurran.com/