[eloid]

As per so many request .... attached is some info
regarding spindle manufactures which you can buy direct from...

I am in no way promoting any companys, or suggesting any products....
or have any business relations with this info...

Please note: i am not related in any way with these suppliers : use for infomational purposes only

Most case your looking for machining parallel lathe type spindle or Machining Center Spindle ..... as refered on most web sites in china





JIangsu Xingchen Electric spindle Co.Ltd.

Email:[email protected]
City: Taizhou
Province/State: Jiangsu
Country/Region: China (Mainland)
Zip: 214500
Telephone: 086-0523-84588169

http://jsxingchen.en.alibaba.com



-------------------------------------

Kinkda Industry Development Co.,LTD

TEL: +86-755-27763569 FAX: +86-755-27353569

http://www.kinkda.com MSN: [email protected]

Email: [email protected]



-------------------------------------------------
Doreen,Du

Anyang Sipu Machinery Co., Ltd,

http://www.aysipu.com/English/index.asp

Email: [email protected]

MSN: [email protected]

ALI ID: cn209725433

Mobil：+8613663801917

Tel: +86-0372-2598501

Fax: +86-0372-2598502


others


http://www.alibaba.com/showroom/elec...facturers.html

[eloid]

attached is a drawing of a ATC 3 kw spindle

[eloid]

JIangsu Xingchen Electric spindle Co.Ltd.

pricing for atc spindle....usd

notice the last picture... higher end chinese spindle manufacture do have model numbers lazer etched on there spindles
not like others.

[eloid]

see attached pic awaiting new pricing...... monday

[FandZ]

JIangsu Xingchen Electric spindle Co.Ltd.

pricing for atc spindle....usd

Thanks for the contact info. Are you sure those prices are in USD?

[eloid]

Thanks for the contact info. Are you sure those prices are in USD?

This is the info they gave me ....( 2009 for atc). I would suggest to everyone that is looking for a spindle do the following. Find a spindle your interest in get price for qty 10 ie water-cooled 2kw er-20 od 100mm etc... note vfd NOT included.

when you got 10 people in line to order.... send one email with everyone on list.... cc email everyone on the email.. confirm pricing..... get the best price you can.... then everyone will pay for there own unit pay and for shiping f.o.b. just get a CNC ZONE group pricing deal. pricing shown is for qty 1.

[eloid]

kinkda atc 3.2 kw atc spindle pricing received... September 19, 2009..... note vfd not included in price.

GD110Z18/3.2 will the unit price is $2350USD.
the spindle use the import bearings. the quality will be better.
if you have any question, pls mail back.

Best regards!


Hellen Chen

frist email


sorry for late reply. we can supply the spindle for you, and we can also make the spindle to your requirement.
in our previous talk, you have not told us the spindle diameter you want, that' s important for us to confirm the spindle model.
for some model, similar to what you want, pls visit our website to get some information.

if you have any question, pls feel free to mail back.

http://www.kinkda.cn/cp/html/?691.html

Best regards!


Hellen Chen



-------------------------------------



Kinkda Industry Development Co.,LTD

TEL: +86-755-27763569 FAX: +86-755-27353569

http://www.kinkda.com MSN: [email protected]

Email: [email protected]

[eloid]

Any person who get a new quote please post here...
with pictures and info... etc... for the group to review

[eloid]

quoted Thursday, September 24, 2009


thank you for you reply. the model we recommend to you is the standard model we have. i think there are some mistake in the net, for KD100Z24/3.2, the dia can not be 100, must be 110 or more.


KD110Z24/3.2k.w 220/380v: unit price: $805USD
KD110Z24/3.7k.w 380v:unit price: $810USD
KD120Z24/5.6k.w 380v: $835USD
(all with FAG germany bearings)

http://www.kinkda.cn/cp/html/?689.html

Best regards!

Hellen Chen

[spoiledbrat]

How dare you undercut a vendors' ridiculous markup. Don't you know you are paying all that extra money for excellent, knowledgeable service?

ha ha.

Thanks, Eloid.

Rob

[eloid]

march 20 2010 pricing for er collets spindles

Sorry for late reply. Attached is the spindle information, you may have a look.

if you have any question, pls mail back.

waiting for your reply.

Best regards!

Hellen Chen

-------------------------------------

Kinkda Industry Development Co.,LTD

TEL: +86-755-27763569 FAX: +86-755-27353575

Website: www.kinkda.com MSN: [email protected]

Email: [email protected]


they didnt show model number for this... i have to bug them... i hope...mod... ger21 mod can append to this post.... when i get the info.

[eloid]

How dare you undercut a vendors' ridiculous markup. Don't you know you are paying all that extra money for excellent, knowledgeable service?

ha ha.

Thanks, Eloid.

Rob

pls check up on this...info.... note: my quotes are all quanity of .....1

I wonder what would happen if the memebers of cnc zone order 10-20? at a time?

[diyengineer]

$460 VS $810..

Why are both 220V 3KW watercooled ER20 collet spindles different prices?

Also, any cheap way to boost my voltage from 220--->380 so i can jump on a larger model? I'm in a residential area.

Thanks Eloid.

march 20 2010 pricing for er collets spindles

Sorry for late reply. Attached is the spindle information, you may have a look.

if you have any question, pls mail back.

waiting for your reply.

Best regards!

Hellen Chen

-------------------------------------

Kinkda Industry Development Co.,LTD

TEL: +86-755-27763569 FAX: +86-755-27353575

Website: www.kinkda.com MSN: [email protected]

Email: [email protected]


they didnt show model number for this... i have to bug them... i hope...mod... ger21 mod can append to this post.... when i get the info.

[eloid]

$460 VS $810..

Why are both 220V 3KW watercooled ER20 collet spindles different prices?

Also, any cheap way to boost my voltage from 220--->380 so i can jump on a larger model? I'm in a residential area.

Thanks Eloid.


different models..... not all apples are the same.... build different...???
it may be more expensive cadillac check spec on web site?

was there a model # your looking for....march quote?... I didnt like the way... they didnt include model number... sent in that quote / email... I sent them a email requesting model numbers for that info.


boost my voltage from 220--->380 ... you need Transformer...for that... or...

as per there comments to me... they can ....and will built to suit... so get one 220v 3kw with the current you want! and rpm thus no transformer needed!!! eh!

[diyengineer]

$460 VS $810..

Why are both 220V 3KW watercooled ER20 collet spindles different prices?

Also, any cheap way to boost my voltage from 220--->380 so i can jump on a larger model? I'm in a residential area.

Thanks Eloid.


different models..... not all apples are the same.... build different...???
it may be more expensive cadillac check spec on web site?

was there a model # your looking for....march quote?... I didnt like the way... they didnt include model number... sent in that quote / email... I sent them a email requesting model numbers for that info.


boost my voltage from 220--->380 ... Transformer?

I will probably just shoot for a 3KW watercooled spindle, 220V.
I looked @ the website but im not quite sure which "model" would work for me. I mainly want to do aluminum and other metals. SO i went under "electric" spindles and they break down into engraving,grinding,machining center,milling turning. Kinda lost which one is the best for my application. I shot him an email asking for a spindle and inverter quote so maybe he can point me in the right direction. Which one were you looking @ Eloid? Maybe you know which ones are better?

[hemsworthlad]

Eloid. . . A hundred Million Thank you's for sharing this information and may I publicley and most sincerely apologise for not thanking you sooner than i have.!! . .(nuts) . . . Top man.:wave:

[eloid]

I will probably just shoot for a 3KW watercooled spindle, 220V.
I looked @ the website but im not quite sure which "model" would work for me. I mainly want to do aluminum and other metals. SO i went under "electric" spindles and they break down into engraving,grinding,machining center,milling turning. Kinda lost which one is the best for my application. I shot him an email asking for a spindle and inverter quote so maybe he can point me in the right direction. Which one were you looking @ Eloid? Maybe you know which ones are better?

I would picked this one for your needs.....http://www.kinkda.cn/cp/html/?689.html

KD100Z24/3.2 its a 220/380v spindle ER20 collet... 3.2kw

inverters.....http://www.kinkda.cn/cp/class/?183.html

but you may want a north america brand with english manual? like...

http://www.automation-overstock.com/products.asp?cat=23

[diyengineer]

I would picked this one for your needs.....http://www.kinkda.cn/cp/html/?689.html

KD100Z24/3.2 its a 220/380v spindle ER20 collet... 3.2kw

inverters.....http://www.kinkda.cn/cp/class/?183.html

but you may want a north america brand with english manual? like...

http://www.automation-overstock.com/products.asp?cat=23

Yes english manuals would be very nice! It says that is only 1HP though. 3.2kw is 4.2HP.

[hobby1818]

$460 VS $810..

Why are both 220V 3KW watercooled ER20 collet spindles different prices?

Also, any cheap way to boost my voltage from 220--->380 so i can jump on a larger model? I'm in a residential area.

Thanks Eloid.


different models..... not all apples are the same.... build different...???
it may be more expensive cadillac check spec on web site?

was there a model # your looking for....march quote?... I didnt like the way... they didnt include model number... sent in that quote / email... I sent them a email requesting model numbers for that info.


boost my voltage from 220--->380 ... you need Transformer...for that... or...

as per there comments to me... they can ....and will built to suit... so get one 220v 3kw with the current you want! and rpm thus no transformer needed!!! eh!

Check here for special sale
http://www.kelinginc.net/CNCSpindleandController.html
I got 1.5KW for $349

[eloid]

Check here for special sale
http://www.kelinginc.net/CNCSpindleandController.html
I got 1.5KW for $349

did you see the new quote from kinkda


1.5KW φ80X176 0-24000 220 0-400 ER11
greasewater7002CP47002CP4$210USD $270USD both are er-11
has same specs looks like same unit... in picture

see post 11