My shop uses Esprit 2009 and we need someone that will do esprit programming on / over the internet. We send you a print, you send us the program. Is this the place to find that?
Thanks
My shop uses Esprit 2009 and we need someone that will do esprit programming on / over the internet. We send you a print, you send us the program. Is this the place to find that?
Thanks
You could also post in the Esprit forum section, it is an active forum there.
Are you just looking for cnc code?What kind of machine?what control does the machine have?
Old post but I'm still available.
I do internet programming for several companies. I need to know the details of the machine and how you want the home positions setup. Top of part, bottom of part etc. I'd also like to know what type of tooling you have so I can program the same. HSS drills & endmills vs. carbide, indexible facemills, taps vs. threadmills. Many companies don't have the budget for carbide and still run HSS. I like to keep things the same as what you do now. If you have a post I need it, if not, I'll have to create one for a fee. Once we're on the same page we can get started. That goes for any other companies also.
1. Send me a print for review.
2. I send you a quote.
3. You let me know if you want the program or not.
4. I program and send to you with Tooling requirements, setup documention
and program.
Let's talk
[email protected]