[bolttjza]

Good day Forum

I have a couple of DC brushed servos (SEM 140V) and I wish to build the high power version of the UHU controller. I can get the controller and crystal from Uli but what is the best source of PCB? Embededelectronics only guarantee their PCB to the original lower voltage. I defiantly do not want a surface mount board.
Any suggestions.

[H.O]

As far as I know you can only get the PCB's for the HP-UHU from Paul (Tenmetalman here on the zone). There is only one version of this PCB available and it does have a couple of SMD components on them. Nothing that can't be assembled using "normal" tools though.

/Henrik.

[bolttjza]

Hendrik

I don't have a problem with a few SMD components so I think Paul's board will do. How do I get a hold of Paul?

Craig

[vishnu]

Contact Irfan, i think he has some Bare PCB boards & assembled ones. The PCBs were developed by paul & its nicely working.

Irfan's email: [email protected]

[H.O]

Hi,
Actually Kreutz developed the board, Paul and Irfan got the boards fabricated and purchased parts to put kits together. They are working nicely indeed.

Craig,
If you look in the recent threads regarding the HP-UHU you'll find Paul, his username here is Tenmetalman. here's one. Try sending him a PM, I have his e-mail adress but it's not available to me at the moment.

/Henrik.

[bolttjza]

Thanks for the help - Hope to get building soon

Craig