[willsilvers]

We just purchased back-(long story)-a Slant Turn 30 cnc lathe, 1988, with AJC and C axis chuck, 16 tool magazine with live tooling with the extended 32 tool magazine across the back. To make another long story short the machine was crashed and the casting that makes up the internal 16 tool turrent is ruined along with the gibs. I was wondering if anyone knew of a reputable cnc salvage operation that handled Mazak lathes or if anyone out there had a slant turn 30 lathe they were parting out. Thanks Clarence

[tonny2105]

DOES THE MACHINE CONTROLLER MAZATROL T1 ?
DO YOU HAVE PARAMETER LIST FOR THE SLANT TURNT 30 WITH MAZATROL T1?

[willsilvers]

no, it has a T3 control

[garyst]

If you are still looking for a slant turn 30 for parts, call Gary at Zimmerman McDonald Machinery in St. Louis. We have a customer that is looking to get rid of a 1986 with Mazatrol T3

[willsilvers]

As you know we ended up buying the slant turn 30 in St Louis and after cleaning it up and getting all the bugs worked out of it, its seems to be a pretty good lathe. It did have a few issues, nothing we couldn't fix.

We're still looking for anyone that has parts or a complete slant turn 30 lathe with the extended tool changer to fix up our other damaged lathe. Specifically in need of the X axis turret assembly casting.

[ragucnc]

mazak slam turt 15 univerial 1000 control MAZATROL-T1

we have turret problem.when we index turret always it rotating.it not clamping in position
we check the read switch back side turret out put is ok
clamp& unclamp solenoid valve also ok
can u please helpme how to solve this problem