[EliseoMonteverd]

Hi.

Machine: MAZAK VQC 15/40 30 Tools
Control : M32

Some days ago the battery died.

Having been replaced it, I found when I want to do a change of tools, the machine stops at the first point of "Y" axis reference axis.

Playing with the parameters, I wanted to do a change of tools in the opposite position where normally it does, but the spindle is oriented, low to the required position along the "Z" axis, and there stops waiting for more information.

Could be a cnc control loss of information?

Thanks in advance.

[juanvzz]

Nesecitas reiniciar el control porque aparentemente se borraron tus parametros y los macros, debes de tener un manual que se llama set up, en el encuentras el procedimiento para recuperar tu maquina si no lo tienes hasmelo saber y te envio este procedimiento.

[EliseoMonteverd]

Nesecitas reiniciar el control porque aparentemente se borraron tus parametros y los macros, debes de tener un manual que se llama set up, en el encuentras el procedimiento para recuperar tu maquina si no lo tienes hasmelo saber y te envio este procedimiento.

Chek your PM box, please.

[EliseoMonteverd]

The machine works , the spindle and the axis are moving, but i'm not
able to change the tool. when i try : t01 m6; then the atc begins to
rotate, the spindle goes in position, the controll-light goes green,
and then the ecexcution-button lights green and nothing happens.

Have anybody a good idea?