[zavateandu]

hello

i have a TAKISAWA TM15 lathe with FANUC 0-TT and i lost all parameters.

i have the parameters but i dont know how to write down because at start-up appears on the screen onlt THND ,no EDIT MODE so i can not put in the parameters.

Does anyone know what should i press at start-up to have the EDIT MODE active or is any procedure?

PLEASE HELP!!!!!!!

Maybe is a combination of keys for FANUC 0-TT for write the paraeters.

[fanuc-support.c]

Try firing them in with the E-Stop in.

[Al_The_Man]

Do you have the PWE bit set =1 and in MDI?
If you PM me an email add I can send you the Fanuc bulletin.
Hopefully you have the 900 parameters, some have to be initially loaded by hand in order for RS232 loading.
Al.

[zavateandu]

yeah solve it.

i push the emg key but was not working so i took it out and made the conection between .


10x for help

GOOOD LUCK!

[vladimir1409]

Hi Zavateandu,

Are you willing to share the parameters for the lathe Takisawa TM15?

thank you very much in advance.