hi i am new at cnc and forums posted a reply on another thread just to see if i could find out how to post my own then saw that little new thread picture so will try it. when i get some computer experience would like to copy a 788 remington bolt on my pcnc using the rotary table to mill the locking lugs which are a very coarse square thread can this be done?
Thread: newby
Results 1 to 3 of 3
-
05-06-2010, 04:13 PM #1
Registered
- Join Date
- Apr 2010
- Posts
- 0
newby
-
05-06-2010, 04:36 PM #2
Registered
- Join Date
- Mar 2008
- Posts
- 256
Is it actually a thread, or a series of 3 grooves?
Either way, it can be done, but will require a different approach in either case.
PS: welcome to the forums
-
05-06-2010, 07:58 PM #3
Registered
- Join Date
- Apr 2010
- Posts
- 0
you are right
flick you are right i always thought--eyeballing--there was a slight pitch but not just a 45degree cam on one set
Reply With QuoteSimilar Threads
-
Newby
By turnNburn1x in forum Community Club HouseReplies: 0Last Post: 11-23-2009, 01:11 PM -
Another Newby
By archer3d in forum Canadian Club HouseReplies: 1Last Post: 04-10-2009, 04:11 PM -
Newby-- help please ;(
By kbillan in forum Uncategorised CAM DiscussionReplies: 10Last Post: 11-27-2008, 12:12 AM -
Yet another Newby gets the bug!!!!
By GPZ_Rider in forum DIY CNC Router Table MachinesReplies: 5Last Post: 04-20-2008, 02:54 PM -
Newby needs 3d help
By KaptanKaos in forum Mach MillReplies: 0Last Post: 12-12-2007, 01:09 AM
Posting Permissions
