Hello
Does anyone have post for masterwood (controler CN10) for Rhino?
Thanks
Thread: posts
Results 1 to 4 of 4
-
05-03-2010, 08:52 PM #1
Registered
- Join Date
- Apr 2009
- Posts
- 22
posts
-
05-04-2010, 01:19 AM #2
Community Moderator
- Join Date
- Mar 2003
- Posts
- 35538
Do you mean RhinoCAM?
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
-
05-05-2010, 03:57 PM #3
Registered
- Join Date
- Apr 2009
- Posts
- 22
yes
Yes Gerry
I mean Rhino Cam.
I have made some changes in another machine's post pr. but it doesnt work they way i need to.
-
05-05-2010, 04:37 PM #4
Community Moderator
- Join Date
- Mar 2003
- Posts
- 35538
At one time I had one for freemill that may have worked, but it was at my old job. Not sure if I have a copy at home.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Reply With QuoteSimilar Threads
-
BobCAD posts vs. Mastercam posts
By justCNCit in forum BobCad-CamReplies: 124Last Post: 08-16-2006, 08:17 PM -
Who so few posts?
By tjones in forum Uncategorised CAD DiscussionReplies: 1Last Post: 01-09-2006, 04:06 AM -
V9.0 posts
By Toledo2K03 in forum Post Processors for MCReplies: 2Last Post: 06-25-2003, 01:21 AM
Posting Permissions
