586,036 active members*
3,571 visitors online*
Register for free
Login
IndustryArena Forum > CNC Electronics > Servo Motors / Drives > Servo Drive hard to get out of fault

Thread: Servo Drive hard to get out of fault

Results 1 to 1 of 1
  1. 05-04-2010, 01:40 AM #1
    Ed Williams
    Ed Williams is offline Registered
    Join Date
    Feb 2006
    Posts
    174

    Servo Drive hard to get out of fault

    I have some CSD servo controllers. I was told they were Phelps controllers. I have wired them like 320 gecko's. They seem to work very well. But here is the problem. I have to turn the power on and off 4 or 5 times before they will come out of fault. Do you have any idea how to correct this. I have attached a drawing of how I have them wired.
    Thanks Ed
    Attached Files Attached Files
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Bad Hard Drive
    By judleroy in forum HURCO
    Replies: 33
    Last Post: 05-02-2022, 02:27 PM
  2. Inverter fault / Drive line fault ?
    By TMILLS in forum Fadal
    Replies: 2
    Last Post: 10-21-2010, 03:20 AM
  3. Z Servo Drive Fault
    By Jaff in forum Bridgeport / Hardinge Mills
    Replies: 2
    Last Post: 09-09-2008, 08:24 AM
  4. hard drive on cnc
    By keithmech in forum CNC Machine Related Electronics
    Replies: 1
    Last Post: 08-27-2008, 03:06 AM
  5. Hard drive servo spindle are any good for home made lathe?
    By patriciooholegu in forum Servo Motors / Drives
    Replies: 5
    Last Post: 12-08-2007, 04:48 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules