[hpghost]

hi,

Anyone can tell me a show me with drwg or pics how to make a simple anti backlash nut?

right now I am ony using a threaded plate as nut for the motion...but it is not perfect....

[joecnc2006]

hi,

Anyone can tell me a show me with drwg or pics how to make a simple anti backlash nut?

right now I am ony using a threaded plate as nut for the motion...but it is not perfect....

Here are the ones i just made, there are several post in the forums of a lot of types.


http://www.cnczone.com/forums/showpo...9&postcount=60

[Dave's_Not_Here]

Maybe try here...
http://www.homecnc.info/ballnuts.htm

[The Wizard]

hi,

Anyone can tell me a show me with drwg or pics how to make a simple anti backlash nut?

right now I am ony using a threaded plate as nut for the motion...but it is not perfect....

The ones I made can be seen in my project log here http://www.cnczone.com/forums/showthread.php?t=6244 in message #3. They work fine on 1/4-20 'all thread'.

The material is nylon bar stock that I had given to me and the springs came from the local hardware store and I used a short piece of 'all thread' as the tap.

Larry