[brenato]

Hi all!

Please help me! I would like to transfer programs from T2 controller to PC on a serial port. I have cable for communication, I tried out the mazak data transfer (MDT32) software. Thats working good, but i know it must be a software for free for this function.
I was tried CNCnet DNC! With this software I can send programs from T2 to PC, but when i would like to send it back it has an error. After 129 bytes of data the commumication breaking, and the T2 controller shows: Tape error.
Could somebody help me?

Million thanks!

[Captdave]

I use Ezatrol for file transfer on a T32 control for the past year or so and have had no problems. I don't drip feed so can't comment on that aspect. Google Ezatrol, then contact Erik the tech guy (I think he was also the developer) to see if it will do everything you need. He was really helpful in making sure it was setup properly and working well after the sale.

[br1]

I use Qmodem for transfer from pc to Mazak New Turbo-X 1.5