[JR1050]

Hi,

I know there are couple of you tecks out there that do Delta tau.I have a weird error and Cali isnt exactly helping...
My set up ,8 axis pmac 1,isa, firmware 1.16h,pewin that goes with NC 2.36 ,adv 600 panal,acc34d i/o and accy 8dp-.Im running nc 2.36.It is a on a cincinatti talon 208 lathe.The machine jogs,homes and the panal works.I have a plc running for estop and errors,it works.I wrote a plc for the duplimatic turret,it downloaded with out errors.All of this is brand new old stock......
When I go to mdi in NC,type "t101",it should at least try to execute the tool change,In stead,I get this error"rs 274 to dprot-integer out of range".The error is in the pcom 32 book and its a function in NC,What do I do about it?I get the same error with no plc's running,so Im thinking its not my code,besides,it errors on the second line and thats from their example!!!!!!!!!!!!
Is this a registry thing,parameter or possible an install error? I was gonna replace the 450mhz p2 with win 98,witha 1000mhz p3 and win 2000,reload pewin and NC,then reload my confg.
Any help anyone could share would be greatly appreciated.Nc is not the easiest thing to work with.....

[Ron22]

I know this is an old post but just wondering if you go it working.
If not let me know maybe I can help