[Walterk]

I have a Masterwood 323 from '94, control CN6, FORA 6.23 . I write a postprocessor for this machine ( VCarve ), but is incomplet.I have not any kind of documentation for the machine. Does have anybody a operating manual for Masterwood 323 or another with CN6 (CN10) control ? Or for another Masterwood from 1992 - 1998 ?Best Regards, Walter

[jura2020]

Hello
I have manual for Masterwood 323 from '94, control CN6.
If you still need the manual, here is it.

http://rapidshare.com/files/44513041...n_LB000040.zip

http://rapidshare.com/files/44513028...ramming_UK.zip

[Walterk]

I have pay 50euro for the complete documentation for Masterwood 323. Now , the machine working fine. I make postprocessors for this machine for VCarvePro.Thank you for your amability !May we change some files with gcode !
Best Regards,
Walter Chele

[jura2020]

Sorry for not see your first post before, you be save 50 euro.
I write post processor for Artcam and must test the files.
How you input G code files into machine and run it.
If you can describe to me I would be grateful.

Thanks in advance
Romeo

[francois5450]

Walter , I have tried many people as to get a post processor for my machine.
I have the same machine as you have.
can you please help me
regards
francois

[jura2020]

Hello francois

Maybe I can help you. For which CAM software you need post procesor?

[francois5450]

hi there
I would appreciate any help i can get
i have spoken to various people and i am still to buy cad cam software but i am not willing to buy software unless i am certain that it will work with my machine.
some guys even came to my factory to look at the machine and code and they promised me that they will get it working before they charge me , after 3 or 4 visits i have not seen them again.
so now i am still sitting with nothing
i had my head in the machine again and it is actually a Masterwood Project 323 '93 model cn6 controller

again i would appreciate any help i can get.
francois
[email protected]

Thanx

[vlietame]

Hello,

I need a manual voor a masterwood project 309 with cn 6 control.

Can send anyone me the manuals you have?

If anyone have an total update of the software, I like to try that to.

[email protected]

Thanks!

[gcolceriu]

Anyone in 2021 that can help with some manuals regarding the 323?