Hi everybody,
this is a VMC with Haas controller, it is two days that it can not reach reference point in X axis. I am exhausted and dont know what to do.
please help!
Hi everybody,
this is a VMC with Haas controller, it is two days that it can not reach reference point in X axis. I am exhausted and dont know what to do.
please help!
Have you checked the "Drive" for the X axis ? If this has been unpluged you will loose your X reference. Has happened to us before when we swapped out the Drive unit and didn't have the Machine at home position.
We all live in Tents! Some live in content others live in discontent.