[hudsonlighting]

Hi Guys, I need 4 small parts made up Aluminium. I was trying to do them myself but my CNC router isnt up to the job unfortunatly.
I have attached the Gcode suitable for Mach3 and the 2d top view drawing.
If needed I could make an Autocad 3D drawing. I will also need 4 front sections made up but I will hand those drawings (once completed) to whoever I choose to use to make these parts.

back case.dxf

back case.txt

[hudsonlighting]

Okay I have had a few requests for 3d drawings so here they are in PDF format, I've also now included the front, I need 4 of each. Thanks
Can provide DFX's if needed but they are too large to upload so I will need your e-mail to send them.
Front Case-Work.pdf

backcase views-Work.pdf

backcase-Work.pdf

[hudsonlighting]

Oh dimensions are in mm

[nofx]

On your backcase specficly, your drawing is describe and pocket with a square corner. That is not easily made. Do the corners need to be sqaure? If you could get away with a fillet, it would be of a radius of the smallest cutter used. You could get a square corner on the places you need by spliting the peice and 2 sides and bolting together.

Food for thought

[hudsonlighting]

Having rounded corners on the inside pocket is no problem at all, the pocket is an area to hold a power resistor and is not critical, infact I have allowed allot of room for it. Thanks