Originally Posted by
Fastest1
A follow up just in case there was a feeling cjdavis618 isnt a stand up guy. He called me immediately after seeing my first post in this thread. He was genuinely concerned and offered to help and even buy it back. I was relieved but after playing with cnc machines for a little while now, I was pretty sure it was my misunderstanding of the set up that was causing the problem. If you saw how many computers and electronic stuff was around his shop and if he had problems during set up, I was doomed! That did not turn out to be the case. After much stubborness on my part, and a question and or email or 2 to Arturo @ Cnc4PC and all is working well. To let others know what I did. I did use the xml from the brains folder from the cnc4pc website. I had to copy all of my xml info from my previously successful file and superimpose it into the new xml. Mostly motor tuning and pin info. A few relay settings I have for spindle and flood needed to be moved over. The most confusion was in regards to the testing via the flyout (tab key). It took me a while to realize I had to select the axis on the screen not on the pendant, it was stated in the directions but A.D.D. made me resist! Works like a top now. It was just a tedious process that each step forward was a single step.