I have an OM control and I cant get the emergency stop to reset any ideas?
I have an OM control and I cant get the emergency stop to reset any ideas?
Depends on the MTB.
Over travel limits, Air pressure switch, door interlocks.
Schematics and ladder screen are a big help.
Al.
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Twist the emergency stop knob so it will unlock.
Tim
************************************************** *********
*~~Darwinian Man, though well-behaved, At best is only a monkey shaved!~~*
************************************************** *********
*__________If you feel inclined to pay for the support you receive__________*
*_______Please give to charity https://www.oxfam.org.au/get-involved/_______*
************************************************** *********
I'm sure u tried the estop... So I would have to agree that your more than likely in a hard overtravel situation so use the emergency release and machine Rdy button together
Have you checked the home limit is not stuck down/on?
If you now have it homing.
Al.
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
You are The Man thanks that was it I didn't think about that but I did use the "machine is down" excuse to get in a round of golf and a days fishing