[taigfraeser]

Hi,
guess I burnt one of the four motor drivers on my deepgroove1 board while installing my limit switches. If I now connect a motor to this specific axis the fan connected to the board doesnt even start and it sounds strange, but when I don´t connect anything to this axis, the board and the other axis are running perfectly (in mach3).
I also purchased another rotary a while ago (http://cgi.ebay.com/ws/eBayISAPI.dll...=STRK:MEWNX:IT) and in the future I´m planning to buy a trunnion from hightech systems and go for a five axis system.
So now I want to buy a five axis driver board and found besides the good old gecko (for which most of the guys here would vote, but which is only four axis, and double the price) two other interesting no-name ebay boards.
Personally I would buy this one:
http://cgi.ebay.com/New-5-Axis-TB656...15011178575189

Would I need anything else (besides the power supply which I still have from the deepgroove1 box), or can I directly connect my motors to this board?

I also found this one pretty interresting:

http://cgi.ebay.com/5-AXIS-TB6560-CN...17060418513223

but shipping from USA is always a big custom problem, while chinese stuff is mostly delivered directly home... ;-)

thanks for some advices and recommendations, cheers

[imsol8]

Deepgroove1 would most likely sell you a g540 drive cheap