I am a coplete idiot aparently. why is aspire doing this.
I have not used my cnc in 6 months and only done a Bitmap to a relif once about a year ago and can't remeber how to do it. I found the Coffe Bean sign tutorial and got it almost figured out.
First. My computer does not do the same as the screen in the video. why does his picture turn yellow in the 2D view and mine turns BLK&WHT?
but I have found a way around that by clicking and deleting the black and white bitmap and then I usually can get the CLEAR image to work SOMETIMES!!
after hours of struggling through this and once it gets a F'ed up I close it and start over from scratch.
the biggest problem is I can get the 2" height of the letters and border and can after struggling get the releif into it but when I turn on the group of the 2" top height letters it adds these little slivers of crap around the letters and then I can't machine it because it excedes the material thickness of a 2" HDU foam.
What are these little slivers and why am I getting them?? Thanks
Image one I am up to the clear bitmap image. then I turn on my component layers again and that is where these little sliver extrude out the top???