HI folks. I'm new to Acramatic, and just setting my first job. Can't get my head around the co-ordinate system setup. I'm Fanuc born and bred, so this a little different for me. My problem is I have a twin pallet horizontal with Acramatic 950 control. Job consistes of using both pallets with identical set up on each pallet (4 station fixture). I am running the same program for both pallets, but I want to run a different coord system for each pallet to utilise a different set of fixture offsets, as the two fixtures are not quite identical dimensionally. Can't get my head around how this works. Can I specify the same program identity number on two different coord systems? And how does the machine know which coord system to run on each pallet?
Hope that makes some sense.
Cheers