hey.. waiting for my machine to get fixed buy i noticed something odd happening when i import g-code into the Mach3 on this machine... everything is almost double scale... not the normal 10x scale from mm to inches, but a smaller almost doubling. If i manually move the X axis in the co-ordinates window from zero inches to +1 inches, that plus 1 inch measures out to 1.3 inches with my calipers.

If i take the same mach3 gcode file and load it into another machine here, the scale is perfect, so the problem seems to be just the way this machine is configured ( from the factory )

any ideas?