Dear sir i have KIWA machining center with fanuc 6m. all axis are fine but when i move z axis it gives alarm 432-Drift in Z axis is excessive. please help me. thanks
Dear sir i have KIWA machining center with fanuc 6m. all axis are fine but when i move z axis it gives alarm 432-Drift in Z axis is excessive. please help me. thanks
You could try upping the VELOZ, the default value is 0, (0-7).
In the 6T it is P32, not sure what it is for the 6M?
But this is probably covering up the true problem which may be counterbalance or other cause of Z error.
Al.
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.