Our shop has 2 Mazaks (1 lathe, 1 mill) both going on 20 years and both have been developing leaks. The lathe has actually had another bottom welded to the tank and the mill has large patches but now those are leaking as well. We are in trying to find something we can possibly line the tank with such as a Rhino liner type material but can't seem to find any info on the net.
We can't be the only ones with this problem so if anyone has any experience with anything like this it would be greatly appreciated to hear about it.
Thread: Coolant Tank Leaking
Results 1 to 3 of 3
-
07-15-2010, 03:57 PM #1
Registered
- Join Date
- May 2008
- Posts
- 3
Coolant Tank Leaking
-
07-15-2010, 05:43 PM #2
Registered
- Join Date
- Jun 2009
- Posts
- 44
You could try a butile pond liner
Brianwww.eBolt.co.uk
www.jacobschuck.co.uk
-
07-15-2010, 06:05 PM #3
Gold Member
- Join Date
- Feb 2009
- Posts
- 6028
Reply With QuoteSimilar Threads
-
coolant tank lid leaking
By R.DesJardin in forum Tormach Personal CNC MillReplies: 37Last Post: 01-29-2009, 03:18 PM -
Leaking coolant reservoir
By JTulley in forum Tormach Personal CNC MillReplies: 5Last Post: 08-03-2008, 02:51 PM -
fiberglass gas tank and leaking.
By krymis in forum Composites, Exotic Metals etcReplies: 6Last Post: 07-28-2008, 01:03 PM -
Haas TM2 Leaking Coolant
By Chris Swier in forum Haas MillsReplies: 1Last Post: 06-21-2008, 03:57 AM -
thru spindle coolant leaking
By GARY DAVIS in forum FadalReplies: 4Last Post: 03-25-2008, 01:28 PM
Posting Permissions
