Yo
It's time to boast about the first details so it's what





Brernardo manual lathe has been converted to CNC.
The use of the machine is modeling mainly very small details - as for me, you can talk about micro-machined holes, eg 0.3 mm or external diameter below 0.2mm - here more modelers could say something, whether it's a lot or not enough
You have a unique opportunity to go with me through all stages of construction


https://www.youtube.com/playlist?lis...gwQdds-t_VniqB


At the beginning, we will look at the actual quality of the lathe sold as "for the most demanding mechanics"


https://youtu.be/kkU-Fnx0NmI?list=PLfHK ... ds-t_VniqB


then we are dealing with a typical modification but for example I did think that an interesting experiment - how much strength does the stepper motor have (4.2Nm)


https://youtu.be/kmU9D0ILAgY?list=PLfHK ... ds-t_VniqB


Now I will show you a bit bigger and simpler details which was quite troublesome anyway (the quality is not yet staggering but something is coming out.)


https://youtu.be/wByGvE-jvbY?list=PLfHK ... ds-t_VniqB
https://youtu.be/z1DXQlb74Ug?list=PLfHK ... ds-t_VniqB




soon I will show you the smallest details and also show how I solved the coolant system but the next episode will be dedicated to the REPATE function, how to make a program to repeat itself and how to use zero shift in LinuxCNC - in the meantime, I invite you to watch episodes of the whole series


Ps. thank you to all forum members for help during the creation - your advice was very helpful


I do not speak English, I am using a Google translator but I will answer questions if possible