586,655 active members*
4,133 visitors online*
Register for free
Login

Thread: Need help

Results 1 to 2 of 2
  1. 07-22-2010, 02:53 AM #1
    beaver077
    beaver077 is offline Registered
    Join Date
    Jul 2010
    Posts
    0

    Question Need help

    Hi im new user on this forum! and need help!
    I`ve a tb6560 3 axis with 3 nema 23 motors and 24v psu. mach 3
    use a db25 to usb converter, so nothing work , and the z axis came really hot
    after 1 or 2 minute . any one have the magic key?
    thank you.
    P.S

    Sorry for my poor english!
    Reply With Quote Reply With Quote
  2. 07-28-2010, 08:33 AM #2
    RichardLiu
    RichardLiu is offline *Registered User*
    Send a message via MSN to RichardLiu
    Join Date
    Jan 2010
    Posts
    2

    Smile

    :rainfro:Hey, do you mean you have a new machine and you found that it doesn't work at all? And the spindle is very hot， right？
    1. Is your spindle water cooling or air cooling?
    Have you read the User's Manual carefully? I'm afraid you just forgot to connect the water cooling pump before you turn on the machine. Besides, could you show me a picture of your machine?
    2. If the machine has a USB device then it's usually has a control panel like a joystick. Is there a similar one on your machine?
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules