[TheBlackBird]

Hello to everybody here, i hope to see some fellow countrymen here also.

My goal is to build my own cnc router/mill , but first i want to start with foam cutting because it's simpler.

Good luck to all of you.

[nokturn]

Hello,
I'm also from Romania. I'm now waiting for a Biesse Rover A4.3 woodworking CNC machine to arrive.
Good luck with building your own cnc.

[interzis]

Hello from Arad, Romania. I also intend to build a 3 or maybe 4 axis CNC router/mill.
First step is already done: the TB6560 board arrived today on my desk and 2 matrix printers was killed for motors.
For now, just playing with mach3 and 3 motors...

Regards,
Seb
:cheers:

[ely862me]

Hi,from Romania too!

I'm trying to build my own cnc(1500X1000X300),and so far i have only the plans and some 4$$$ .

It is a hard task to find all the components with a restrained budget .

[KTM]

Hi,

I want to build a foam milling machine about 1000x2000x1000 mm and I would like to know if there are somewhere the plans for such thing, available for download.

I am from Galati - Romania.

All the best to all of you guys !

Regards,

Adrian

[nokturn]

Hi,

I want to build a foam milling machine about 1000x2000x1000 mm and I would like to know if there are somewhere the plans for such thing, available for download.

I am from Galati - Romania.

All the best to all of you guys !

Regards,

Adrian

I advise that you start a new topic describing what you want to build and what you plan to use the machine for. I think many people will help.

Good luck!

[KTM]

OK Nokturn, thanks for the advice, I have posted a new thread I hope I will have some advices as well.

Best,

Adrian

[HerrSpiegellman]

Well hello there !

I'm from Romania too Check this out and if you like it, please vote : http://www.cnczone.com/forums/cnczon...more_cncs.html

The thing is that if I get my workshop done, it would be also easier for you to make your CNCs in my workshop