Hey All,
Does anyone know the shank diameter and OAL of the http://www.drewtronics.net/ bits?
Hey All,
Does anyone know the shank diameter and OAL of the http://www.drewtronics.net/ bits?
Pretty sure they are 1/8" shank, and if I remember right, about 2" long.
thanks!
Marcll,
Shank diameter is 1/8"
Over all length(OAL) is 1.50 inches
Material is micro grain carbide
Hope this helps
Andrew Abken
www.drewtronics.net - PCB Cutters