I've rebuilt my predator and mini raptor and have a number of parts that i don't need from the original now.
These are all "new" but will be probably scratched up a little - especially the predator ones which were kicking around the shop and storage a while.
Mini raptor:
- 50x50 x "18" main extrusions.
- "18" wide lower cross beam extrusion
- 3pc ball screw bearing mount blocks fixes side
- 2pc ball nut mount block y/z
- 1pc ball nut mount block x (bottom)
- "24" 20mm X ball screw. cheap chinese one.
Predator:
- Y saddle - cut for modification to access grease fitting
- Z saddle - cut for modification to access grease fitting
- Z main bake plate - some drilled and machined modifications
- Z ball screw 2510 tbi
- Z ball screw support block fixed
- X ball screw support block fixed
- X ball screw support block free
- Z ball nut mount block
- nema 34 motor mount
- "48" x ball screw 2525
If you ended up missing something, or damaged something and need one, let me know.